Author Archives: Jeremy Whitehurst

The case is coming along nicely. I’ve completed the dovetails and fit the mitered ends. I used a whats referred to as a ramp block to make the mitered corners perfect. I cut a large block and 45* and clamped it to the workpiece. I used the surface as a reference point, and with aContinue reading “Modern Media Console: Case Joinery”

I’ve begun breaking down the lumber into the rough parts. The biggest challenge so far has been resawing the big, heavy 8/4 maple board which will be used for the case. There was quite a bit of tension in the board and there was a lot of spring back after I cut it apart. Unfortunately,Continue reading “Modern Media Console: Rough Cuts & Layout”

Today marked the beginning of a new project. A trip to the lumber yard is always an exciting experience. I picked up an 8/4 board of Mahogany, one 8/4 and a few 4/4 boards of Curly Maple. I’ll be turning this beautiful lumber in to a modern media console that will house a record playerContinue reading “Modern Media Console”